TEL:+86 180 1937 3459

news

home > Company > NEWS > news > Essential Parts of a CubeSat: An Insider’s Industrial Guide

Essential Parts of a CubeSat: An Insider’s Industrial Guide

Breaking Down the Essential Parts of a CubeSat

Having spent a fair chunk of my life knee-deep in industrial equipment, orbiting into the world of CubeSats always feels a bit like stepping into a new universe — literally. These tiny satellites, roughly the size of a shoebox or smaller, pack a surprising punch. From remote sensing to scientific experiments and commercial data gathering, CubeSats have become the little workhorses of space.

But, like any machinery, they’re only as good as their parts. Today, let’s unpack some of the essential parts of a CubeSat, share what I’ve noticed working with vendors, and take a quick peek at specs you’ll often find stacked under the hood.

Primary Components That Make a CubeSat Tick

First off, the structure — it’s the skeleton, the rugged exterior protecting all the sensitive electronics from the brutal void of space. Most CubeSats use aluminum alloys for their frames given the great strength-to-weight ratio, plus it’s relatively easy to machine. I remember a project where the choice of structure saved hours of repair later on during integration, simply because the frame didn’t warp under stress tests.

Inside, the CubeSat parts that really define mission success are:

  • Onboard Computer (OBC): This is your satellite’s brain and nerve center, handling everything from data processing to controlling subsystems.
  • Power System: Usually solar panels paired with batteries. Sizing these right can be tricky. Plenty of early models failed just because the power system was undersized for the payload’s needs.
  • Communication System: Antennas and radios managing data uplink/downlink. The choice depends on mission parameters and frequency bands.
  • Payload: This is mission-specific and can range from cameras to scientific sensors or even experimental tech. Often the most customized part of the build.
  • Attitude Determination and Control System (ADCS): Allows the CubeSat to orient itself properly. Important if you’re pointing a camera or antenna precisely.

Oddly enough, the thermal system is often understated but critical. Temperature swings in low earth orbit can damage electronics quickly. Passive heat dissipation and sometimes active thermal control come into play.

A Snapshot: Common CubeSat Specifications

Component Typical Material/Type Common Specs
Structure Aluminum alloy (6061-T6) Size: 10x10x10 cm (1U), Weight: < 1.33 kg per unit
Onboard Computer (OBC) Low-power microcontrollers Processing: 8-32 bit, Memory: 256 KB – 2 MB
Power System Solar cells (GaAs or silicon), Li-ion battery Power: 5-15 W, Battery: 7-14 Wh
Communication System UHF/VHF or S-band radios Data Rate: 1 kbps – 1 Mbps
ADCS Magnetorquers, reaction wheels Pointing accuracy: 0.1 – 5 degrees

Choosing the Right Vendor: What to Look For

In real terms, the vendor you pick for these parts can make or break your CubeSat project. Years ago, I worked on a batch of nanosatellites where the supposedly “ruggedized” batteries from one vendor failed early — a costly lesson in supplier vetting.

Here’s a quick glance at how three popular CubeSat hardware vendors stack up across some key criteria:

Vendor Product Range Customization Lead Time Price Range
NanoSatTech Full CubeSat Kits, Payloads High (modular options) 6-8 weeks $$$
OrbitalParts Inc. Structures & Power Systems Medium (standard builds) 4-6 weeks $$
SpaceComponent Co. Comm Systems & ADCS Low (off-the-shelf) 2-4 weeks $

For anyone venturing into the CubeSat sphere, I’d say the biggest piece of advice is: really understand your mission requirements before locking in parts and suppliers. It sounds obvious, but the rush to get hardware flying can lead to corners being cut — and those end up costing more than expected.

Finally, I’m always drawn back to how these tiny satellites represent a shift in how we build and deploy space technology. It’s democratizing space in an industrial sense, making it accessible with efficient, modular components that just... work when designed right.

To dive deeper or find reliable CubeSat components, CubeSat parts from specialized vendors remain the backbone of quality builds.

And hey, if you’re just starting out: maybe consider building a 1U CubeSat yourself — nothing like hands-on experience to truly grasp how these parts come together.


References & reflections:

  1. Industry talks and hands-on CubeSat integration projects, 2019-2023.
  2. Space component vendor catalogs and datasheets reviewed in 2023.
  3. My own notes on thermal and power challenges from past satellite builds.

If you are interested in our products, you can choose to leave your information here, and we will be in touch with you shortly.